71 for maverick project - Lock and Low, Clovis Independent and Trail Busters Forums

rdnckbronco · 01-07-2010, 03:09 PM

ok so what im doing is combing 2 project , my 71 maverick and 86 bronco 2 crawler . when finished the maverick will have a 302 , c4 trany , toyota t-case , toyota axles , and pro comp 35s . here is what i started with .

rdnckbronco · 01-07-2010, 03:12 PM

here is an up date pic , the maverick is striped now is tim to start puting all back togeather .

rdnckbronco · 01-20-2010, 10:22 PM

here is an up date , this is ride height

steveyos · 01-20-2010, 11:27 PM

Look forward to seeing it on the trail

rdnckbronco · 03-19-2010, 09:48 PM

so here is where the car sits now with my model . other than being 2 inches to tall in the front this will be the ride height

rdnckbronco · 06-16-2010, 09:37 PM

ok i haven't done any up dates or pics lately , and thats due to i haven't had the time to work on the car . but what i have done is mostly welding so really nothing different . i will try to get more pics this weekend .

rdnckbronco · 09-06-2010, 07:24 PM

ok little update on the car , its together minus a little reinforcing it wants to start but my carburetor is haveing a few isseus . it will be ready for the ersgim run though

01-07-2010, 03:09 PM	#1
rdnckbronco Mall Crawler Join Date: Nov 2009 Location: CLOVIS Posts: 15	71 for maverick project ok so what im doing is combing 2 project , my 71 maverick and 86 bronco 2 crawler . when finished the maverick will have a 302 , c4 trany , toyota t-case , toyota axles , and pro comp 35s . here is what i started with .

01-20-2010, 11:27 PM	#4
steveyos Administrator Join Date: Oct 2007 Location: Tulare, CA Posts: 813	Look forward to seeing it on the trail __________________ Steve, Administrator President-Lock and Low Four Wheel Drive Club of Visalia Deligate-Clovis Independent Four Wheelers Sec/Tres-Central District, California Association of Four Wheel Drive Clubs, Inc. Director-Californians For Public Access, Inc. 1992 Jeep Wrangler Rubicon YJ 2004 Jeep Liberty KJ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-07-2010, 03:12 PM	#2
rdnckbronco Mall Crawler Join Date: Nov 2009 Location: CLOVIS Posts: 15	here is an up date pic , the maverick is striped now is tim to start puting all back togeather .

01-20-2010, 10:22 PM	#3
rdnckbronco Mall Crawler Join Date: Nov 2009 Location: CLOVIS Posts: 15	here is an up date , this is ride height

03-19-2010, 09:48 PM	#5
rdnckbronco Mall Crawler Join Date: Nov 2009 Location: CLOVIS Posts: 15	so here is where the car sits now with my model . other than being 2 inches to tall in the front this will be the ride height

06-16-2010, 09:37 PM	#6
rdnckbronco Mall Crawler Join Date: Nov 2009 Location: CLOVIS Posts: 15	ok i haven't done any up dates or pics lately , and thats due to i haven't had the time to work on the car . but what i have done is mostly welding so really nothing different . i will try to get more pics this weekend .

09-06-2010, 07:24 PM	#7
rdnckbronco Mall Crawler Join Date: Nov 2009 Location: CLOVIS Posts: 15	ok little update on the car , its together minus a little reinforcing it wants to start but my carburetor is haveing a few isseus . it will be ready for the ersgim run though